With the help of this article, you will be able to have a broader understanding of best 4 channel amp for mids and highs, as I will be discussing the features, pros, and cons in detail. Other than that, make sure to read until the end.
If you don’t have the time or the energy to look for the 4 channel amp for mids and highs that best suited for you, no worries; I have you covered. I have put together here a list of the best 4 channel amp for mids and highs currently available.
Top 10 Best 4 Channel Amp for Mids And Highs
Reviews on 10 Top Rated 4 Channel Amp for Mids And Highs
If you are looking for the Best 4 Channel Amp for Mids And Highs, then any of these 10 would be a great choice for you.
- Features – The 4 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass crossovers, hi/low level inputs, MOSFET Power Supply, Thermal Protection, Gain Control, 2 Ohm Stable
- Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class b amplifier has no current flowing.
- Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others.
- Power – This Class A/B 2500 watt Amplifier has a power rating distribution as followed 625 X 4 MAX @ 2 OHMS. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
- Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Competition Grade Class D 4-Channel MOSFET Car Power Amplifier
- Peak Power at 2 Ohms: 465 Watts x 4 Channels (14.4v)
- RMS Power at 2 Ohms: 320 Watts x 4 Channels (14.4v)
- Stable at 2 Ohms, Frequency Response: 10 Hz - 40,000 Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
- User Adjustable Variable High and Low Pass Filters with x1 and x10 Switches
- Heavy Duty Advanced Heatsink Design Allows for Maximum Cooling & Efficiency | Signal-to-Noise Ratio (Sensitivity): 85 dB
- 500 watts x 2 mono bridged @ 4 ohms
- 125 watts x 4 @ 4 ohms
- 250 watts x 4 @ 2 ohms
- switchable 12/6/0 db bass boost
- red heat sink elements
- Included components: Quick Start Guide
- Class AB
- 2Ω stereo & 4Ω bridged full-range operation
- Military-grade PCB with PWM MOSFET power supply
- Direct short, thermal & overload circuit protection
- High/speaker-level & low-level/RCA inputs
- Bridgeable
- Variable input voltage
- QTD (Quick Thermal Dispersion) technology heat sink
- Low-noise preamp
- 600 W MAX Power @ 2 Ohm x 4 Channels
- 300 W MAX Power @ 4 Ohm x 4 Channels
- 1200 W MAX Bridged Power @ 4 Ohm x 2 Channels
- Full-Range, Class A / B Topology, MOSFET Power Supply
- Low and High Level Inputs, Variable Filter, Variable Bass Boost
- Remote Subwoofer Control, Blue Backlit Illumination
- Dimensions: Depth 15.9” x Width 7” x Height 2.4"
- Full-range
- Class-D amplifier
- 4 channels of 200 watts RMS @ 1 Ohm
- Crossover HPF and LPF
- Variable gain control
- 1000W RMS / 2000W MAX POWER: The Lanzar 2000 watt 4 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 500 W x 4 output at 4 ohms or 1000 W x 2 bridged output at 2 ohms for a high quality audio
- MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
- SHORT CIRCUIT PROTECTION: This 4 ch amp is also equipped with a 2x30 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
- SLIM SIZE DESIGN: Measuring only 10.63'' W, 1.78'' H, and 14.02'' L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation
- Number Of Channels : 04
- Country Of Origin : China
- Maximum Power : 12.60 Vdc - 4
- Product Dimensions: 6 X 6 X 6 Inches
- Brand new and reliable quality 4 Channel Car Amplifier
- Can connect to 4 speakers,6 phase high frequency intermediate frequency low frequency regulation
- Double low frequency output,can be push any size Subwoofer within 160W rated power
- This 4 channel amp is also equipped with fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions.
Conclusion
The article ends here, detailing the best 4 channel amp for mids and highs. However, the best option for each person will vary depending on their individual needs and preferences. But here, the products we have listed above, have great features and are highly rated by customers. So, I hope that it may have helped you finalize your decision to choose the best one for you.
Last update on 2022-07-03 / Affiliate links / Images from Amazon Product Advertising API