With the help of this article, you will be able to have a broader understanding of best amplifier for jbl speakers, as I will be discussing the features, pros, and cons in detail. Other than that, make sure to read until the end.
If you don’t have the time or the energy to look for the amplifier for jbl speakers that best suited for you, no worries; I have you covered. I have put together here a list of the best amplifier for jbl speakers currently available.
Top 10 Best Amplifier for Jbl Speakers
Reviews on 10 Top Rated Amplifier for Jbl Speakers
If you are looking for the Best Amplifier for Jbl Speakers, then any of these 10 would be a great choice for you.
JBL Basspro SL2 - Powered under seat subwoofer system
- 125W RMS compact powered subwoofer system with Bass Boost of 0dB to plus9dB at 70Hz
- Dimensions (L x W x H): 13-9/16" x 9-7/8" x 2-13/16" (344mm x 250mm x 71mm)
- Frequency Response 35Hz – 120Hz
- 8" Powered Subwoofer
- Car audio Subwoofer
JBL Commercial 70v Amp+(4) White 6" Ceiling Speakers For Restaurant/Bar/Cafe
- (1) JBI VMA160 60-Watt 70 Volt 70V Mixer/Amplifier with Bluetooth 5 Channel Inputs. (1) Pairs of RockvilIe CCL6T White 70V 6" Commercial Ceiling Speakers 4 Restaurant/Office. Features: JBI VMA160 60 Watt 70V Mixer/Amplifier with Bluetooth and 5 Channel Inputs. Max Output Power: 60 Watts. Frequency Response: 20 Hz - 20 kHz. THD (Total Harmonic Distortion): <0.5%. Signal-to-Noise Ratio: > 76 dB
- Input Impedance: Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms. Phantom Power: 27VDC. Crosstalk: -70 dB. Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz. Minimum Load Impedance: 4 Ohms, 80 Ohms,160 Ohms. Insertion Loss: 1 dB Maximum. Number of Inputs: 5. Number of Outputs: 1. Tone Control: Bass +/-14dB @ 50Hz; Treble +/-14dB @10kHz
- Input Sensitivity: Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS. Independent bass and treble controls for each output channel. Paging Chime, and Priority Muting. Rack mounting hardware included. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 19.4 Lbs. 70V Power Options: 10w (White). 5w (Green). 2.5w (Red). Features:
- (4) RockvilIe CCL6T White 70V 6" Commercial Ceiling Speakers. Perfect for PA announcements or background music or any other applications where you want many speakers installed. Transformer with terminals for 10 Watts, 5 watts, or 2.5 watts. Perfect for restaurants, offices, schoolsm churches, buildings, and other commercial applications. Double Paper Cone. 0.75 voice coil. 3.5 oz ferrite magnet
- 6 Woofer. Fireproof screw terminal block. High Quality Spring Loaded Push Terminals. Paintable Flush Mount Grills. Frequency Response: 80Hz 15KHz. Sensitivity: 88dB @ 1w / 1m. Impedance: 1K, 2K, 4K ohms. Mounting Depth: 2.36. Cut-out Diameter: 6.5. Color: White (paintable)
JBL Commercial 70v Amp+(8) White 5" Ceiling Speakers for Restaurant/Bar/Cafe
- (1) JBI VMA160 60-Watt 70 Volt 70V Mixer/Amplifier with Bluetooth 5 Channel Inputs. (8) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers 4 Restaurant/Office. Features: JBI VMA160 60 Watt 70V Mixer/Amplifier with Bluetooth and 5 Channel Inputs. Max Output Power: 60 Watts. Frequency Response: 20 Hz - 20 kHz. THD (Total Harmonic Distortion): <0.5%. Signal-to-Noise Ratio: > 76 dB
- Input Impedance: Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms. Phantom Power: 27VDC. Crosstalk: -70 dB. Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz. Minimum Load Impedance: 4 Ohms, 80 Ohms,160 Ohms. Insertion Loss: 1 dB Maximum. Number of Inputs: 5. Number of Outputs: 1. Tone Control: Bass +/-14dB @ 50Hz; Treble +/-14dB @10kHz
- Input Sensitivity: Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS. Independent bass and treble controls for each output channel. Paging Chime, and Priority Muting. Rack mounting hardware included. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 19.4 Lbs. 70V Power Options: 5w (White). 2.5w (Green). 1.25w (Red). Features:
- (8) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers. Perfect for PA announcements or background music or any other applications where you want many speakers installed. Transformer with terminals for 5 Watts, 2.5 watts, or 1.25 watts. Double Paper Cone. 0.5 voice coil. 1.7 oz ferrite magnet. 5 Woofer. Fireproof screw terminal block. High Quality Spring Loaded Push Terminals
- Paintable Flush Mount Grills. Frequency Response: 100Hz 17KHz. Sensitivity: 86dB @ 1w / 1m. Impedance: 2K, 4K, 8K ohms. Mounting Depth: 1.77. Cut-out Diameter: 5.98. Color: White (paintable)
JBL Lifestyle Molded Carry Case for Link 10 Bluetooth Portable Speaker; Rugged Eva Shell with Weather Resistant Zippered Seal & Backpack Clip (JBL-LINK10-CASE)
- Durable EVA hard-shell case provides weather resistant protection for the JBL link 10 portable Bluetooth speaker
- Officially Licensed case with JBL logo plate and custom fit Interior
- Soft micro-suede lined interior
- Weather resistant zippered seal
- Includes carinbeaner style backpack clip
(2) JBL JRX225 Dual 15" Professional 4000w Passive DJ/PA Speakers 4 Ohm JRX 225
- Features: JBI JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker. Dual JBI low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver
- Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure
- SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W
- Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz
- Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M115-8A x 2
JBL VMA1120 Commercial/Restaurant 70v Bluetooth Mixer/Amplifier+6 Wall Speakers
- Package Includes: (1) JBI VMA1120 Commercial/Restaurant 120W 70v Bluetooth Mixer/Amplifier, 5 Inputs. (3)2 RockvilIe WET-7020B 5.25" 70V Commercial Indoor/Outdoor Wall Speakers in Black. Features of VMA1120: JBI VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs. 5-Input Mixer. Supports USB Drives and Bluetooth. 120W, 1-Output Amplifier. Euroblock, RCA, and 1/4" Inputs. Euroblock Outputs. Per-Channel Bass and Treble Controls. Voice-Activated Ducking
- Front-Panel Display and Controls. Configurable Output Routing. Includes Rack Mount Kit. Specifications: Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms. Insertion Loss: 70 V and 100 V Outputs: 1 dB Max. Input Channels: 5. Output Channels: 1. Tone Control: Bass and Treble non-detented potentiometers on each channel Bass: 14 dB @ 50 Hz Treble: 14 dB @ 10 kHz. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz
- Input Sensitivity: Mic Input: 5.5 mVrms Line Input: 1.3 Vrms RCA Input (Stereo In): 130 mVrms. Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB. 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. Total Harmonic Distortion (THD): Power Amp Output: <0.5%, 20 Hz to 20 kHz
- Signal to Noise Ratio: >76 dB. Input Impedance: Mic: 400 Ohms Line: 20k Ohms RCA: 50k Ohms. Mic: 400 Ohms. Line: 20k Ohms. RCA: 50k Ohms. Phantom Power: 27 VDC. Crosstalk: -70 dB. Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz. Minimum Load Impedance: Low Impedance Output: 4 Ohms 70 V Output: 40 Ohms 100 V Output: 80 Ohms. Low Impedance Output: 4 Ohms. 70 V Output: 40 Ohms. 100 V Output: 80 Ohms. Operating Temperature: 32F to 95F. Humidity: 95% RH
- Storage Temperature: -4F to 185F. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 20.2 Lbs. Tone Control: Bass and Treble non-detented potentiometers on each channel. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz. Input Sensitivity: Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB
JBL Commercial 70v Amp+12 White 5" Ceiling Speakers for Restaurant/Bar/Cafe
- (1) JBI VMA160 60-Watt 70 Volt 70V Mixer/Amplifier with Bluetooth 5 Channel Inputs. (12) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers 4 Restaurant/Office. Features: JBI VMA160 60 Watt 70V Mixer/Amplifier with Bluetooth and 5 Channel Inputs. Max Output Power: 60 Watts. Frequency Response: 20 Hz - 20 kHz. THD (Total Harmonic Distortion): <0.5%. Signal-to-Noise Ratio: > 76 dB
- Input Impedance: Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms. Phantom Power: 27VDC. Crosstalk: -70 dB. Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz. Minimum Load Impedance: 4 Ohms, 80 Ohms,160 Ohms. Insertion Loss: 1 dB Maximum. Number of Inputs: 5. Number of Outputs: 1. Tone Control: Bass +/-14dB @ 50Hz; Treble +/-14dB @10kHz
- Input Sensitivity: Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS. Independent bass and treble controls for each output channel. Paging Chime, and Priority Muting. Rack mounting hardware included. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 19.4 Lbs. 70V Power Options: 5w (White). 2.5w (Green). 1.25w (Red). Features:
- (12) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers. Perfect for PA announcements or background music or any other applications where you want many speakers installed. Transformer with terminals for 5 Watts, 2.5 watts, or 1.25 watts. Double Paper Cone. 0.5 voice coil. 1.7 oz ferrite magnet. 5 Woofer. Fireproof screw terminal block. High Quality Spring Loaded Push Terminals
- Paintable Flush Mount Grills. Frequency Response: 100Hz 17KHz. Sensitivity: 86dB @ 1w / 1m. Impedance: 2K, 4K, 8K ohms. Mounting Depth: 1.77. Cut-out Diameter: 5.98. Color: White (paintable)
JBL Professional CSMA180 Commercial Series 80-Watt Powered Audio Mixer/Amplifier
- Ideal for commercial and industrial use
- Sleek industrial look with illuminated rings, making them easy to see and operate
- 4 inputs with 1 output of 80-watts of power
- Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection
- Supports 70V and 100V distributed audio systems without needing a separate transformer
JBL STAGE1200D Dual 12" Car Audio Ported Enclosure with STAGEA3001AM 300 Watt Mono Amplifier
- Bundle Includes: STAGE1200D, STAGEA3001
- The JBL Stage slim enclosure are designed to fi t in just about any vehicle with simple installation. It is slim, sleek, stylish, and don’t sacrifice on sound.
- Speakers are carefully tuned to assure high SPL and low distortion. This means that the usual specifications as well as speaker characteristics are considered when tuning for the JBL sound.
- JBL speakers have to undergo a rigid testing process that would destroy lesser speakers. JBL freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.
- This is JBL—the speaker and sound that has excited audio enthusiasts for over 70 years. There’s nothing better than riding with JBL sound.
JBL VMA160 Commercial/Restaurant 120W Bluetooth Amplifier+White Wall Controller
- Package Includes: (1) JBI VMA160 60-Watt 70 Volt 70V Mixer/Amplifier with Bluetooth 5 Channel Inputs. (1) JBI CSR-V White Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers. Features: JBI VMA160 60 Watt 70V Mixer/Amplifier with Bluetooth and 5 Channel Inputs
- Max Output Power: 60 Watts. Frequency Response: 20 Hz - 20 kHz. THD (Total Harmonic Distortion): <0.5%. Signal-to-Noise Ratio: > 76 dB. Input Impedance: Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms. Phantom Power: 27VDC. Crosstalk: -70 dB
- Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz. Minimum Load Impedance: 4 Ohms, 80 Ohms,160 Ohms. Insertion Loss: 1 dB Maximum. Number of Inputs: 5. Number of Outputs: 1. Tone Control: Bass +/-14dB @ 50Hz; Treble +/-14dB @10kHz
- Input Sensitivity: Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS. Independent bass and treble controls for each output channel. Paging Chime, and Priority Muting. Rack mounting hardware included. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches
- Product Weight: 19.4 Lbs. JBI CSR-V White Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers. Color: White. For CSM-21 & CSM-32 Mixers. Controls Volume. Dual RJ45 Connectors. Uses Cat 5 Cable
Conclusion
The article ends here, detailing the best amplifier for jbl speakers. However, the best option for each person will vary depending on their individual needs and preferences. But here, the products we have listed above, have great features and are highly rated by customers. So, I hope that it may have helped you finalize your decision to choose the best one for you.
Last update on 2023-03-31 / Affiliate links / Images from Amazon Product Advertising API
