With the help of this article, you will be able to have a broader understanding of best cb antenna for car, as I will be discussing the features, pros, and cons in detail. Other than that, make sure to read until the end.
If you don’t have the time or the energy to look for the cb antenna for car that best suited for you, no worries; I have you covered. I have put together here a list of the best cb antenna for car currently available.
Top 10 Best Cb Antenna for Car
Reviews on 10 Top Rated Cb Antenna for Car
If you are looking for the Best Cb Antenna for Car, then any of these 10 would be a great choice for you.
- Type: 1/4 wave; Impedance: 50 Ohms
- Frequency: 26-28 MHz
- SWR Value: 1.1/1 pre-adjusted
- BW / # of Channels: 800 KHz / 80 Channels
- Length: 19.69 inches ; Whip: Dual Helical
- Excellent Strength: the spring is made of durable, top-grade electro-polished stainless steel. The upper and lower inserts are made of chrome-plated brass. The perfect balance of stiffness and flexibility makes it easier to pass through low clearance areas.
- Easy Install: Unscrew the original antenna, then install the spring antenna mount on the car, and then tighten the antenna by hand. The operation is simple, convenient, and fast.
- Strong Practicality: The spring antenna protects the antenna and maintains the stability of the antenna. Something bends properly after hitting the antenna, and it will quickly return to its position without shaking too much, which can protect the car from impact. It is used for antennas up to 60 inches long and is suitable for CB and amateur radio Antennas.
- Great Addition: standard 3/8" x 24 thread fits most off-road vehicles. Whether you are driving an off-road ATV, UTV, or jeep, the spring seat is a practical and useful addition to any vehicle equipped with an LED whip.
- What You Get: 1 Pack of heavy-duty stainless steel antenna spring mount with worry-free 12 months of warranty and lifetime friendly customer service.
- 【New Version CB Radio Antenna】The length is shorter and the signal is better. The new version CB radio antenna constructed by high quality and durable material. It can greatly improve the CB radio reception！
- 【Compatible with】Compatible with CB radios from many brands,such as President Midland Cobra Uniden Anytone CB Radio and other brands.
- 【Heavy Duty Magnetic Base】Heavy duty magnetic mounting, it can easy to be installed on the roof, hood or trunk of vehicles and trucks, and will not scratch.
- 【Further Information】Working Frequency: 27MHz , Max Input Power: 30W , Cable Type: 3m / 10 feet RG58/U Coaxial Cable , Cable Connector Type: PL-259 Male Connector , Accessoried with BNC Male to SO-239 Female Connector Adapter.
- 【Warranty】Simple and convenient return process. 100% satisfaction guaranteed. Warranty would be valid for 12 months.
- Heavy Duty Magnetic Mount, easy to be installed on the roof, hood or trunk of vehicles and trucks, and will not scratch. The antenna design is portable, lightweight and durable.
- Compatible with CB radios from many brands, improve quality and range to CB radio reception. Works on all channel within CB radio frequency range of 26MHz to 28 MHz.
- Working Frequency: 27MHz; Max Input Power: 30W; Cable Type: 3m/10 feet RG58/U Coaxial Cable; Antenna Height: 10.8inch/27.5cm; Weight: 450g;
- Compatible with Uniden Bearcat 980 880 PRO510XL PRO520XL PRO505XL PC78LTX CMX760 PC88LTX PC68LTX, Cobra 29LTD, Galaxy DX-959B DX-939F Mobile Radio etc
- Package List: 1 x Antenna (PL-259 Male Connector), 1 x Connector Adapter (BNC Male to SO-239 Female Connector Adapter) (As the Picture Shown);
- LONG ANTENNA - Taller Antennas = Better Range! 28 Inch long for ultimate range & receiving!
- FULL KIT - includes magnet mount with pre-intalled 10ft of coaxial cable, coil load, and stainless steel whip.
- Magnetic base - Improve reception by harnessing large metal surfaces.
- Weather Channel Capable, Covers all CB frequencies.
- Warranty would be valid for 12 months against manufacturing defect.
- 【Feature】Frequency Range: 26-28MHz (Center Frequency: 27MHz)；MAX RF Power: 30W；Cable: RG-58U 4 mt；V.S.W.R: 1.2:1；Cable: RG-58U 4 mt;Impedance: 50 Ohm
- 【Compatible Model】Cable Connector Type: PL-259 Male Connector，Compatible with most Handheld CB Radios ；Such as Cobra Midland Uniden ,Other 27MHZ radios suitable for this antenna.
- 【Antenna Full Kit】Get Extended Kit of radio with Antenna Magnetic Base,PL-259 Male Connector,4m/13feet Cable;One package solves all your needs!
- 【Easy to use】 With Strong Mgnetic Base,No tool needed, It only takes a few minutes to install your new radio antenna
- ★【Worry-free After-sales Service】 ABBREE also provide our own 30-day hassle-free return, 3-month warranty
- 28 inch cable let you can put the antenna to the best position with good signal.
- FULL KIT - includes strong magnetic sucker with 197 inch of coaxial cable, coil load, and stainless steel whip.
- Strong magnetic base - Improve reception by harnessing large metal surfaces.
- Heavy Duty Magnetic Mount - Note the antenna must be magnetically mounted for the best performance and lowest SWR
- Easy to install on the roof or trunk of any vehicle and enjoy quality signal reception.
- Compatible with Amateur Mobile Radio, Ham Radio, FRS GMRS Two Way Radio: BTECH, ICOM, Kenwood, Midland, Yaesu, TYT, AnyTone, Radioddity, Cobra, Uniden, President, Galaxy Audio, Pro Trucker, Stryker;
- Feature: with Through Hole Mounting Fixed Bracket Lip Mount
- Hole Diameter: 16mm
- Fitable Connector: UHF SO239 Female Right Angle Bulkhead Mount Connector
- Package List: 1 x Lip Mount Bracket(including Hexagon Wrench) (As the Picture Shown)
- Compatible with CB radios from many brands, improve quality and range to CB radio reception. The antenna design is portable, lightweight and durable, works on all channel within CB radio frequency range of 26MHz to 28 MHz.
- Heavy Duty Magnetic Mounting; Easy to be installed on the roof, hood or trunk of vehicles and trucks, and will not scratch.
- Working Frequency: 27MHz; Max Input Power: 30W; Cable Type: 3m / 10 feet RG58/U Coaxial Cable; Antenna Height: 13 inch / 33cm; Weight: 480g;
- Cable Connector Type: PL-259 Male Connector; Accessoried with BNC Male to SO-239 Female Connector Adapter; Compatible with Mobile CB Radios and Handheld CB Radios;
- Package List: 1 x Antenna, 1 x Connector Adapter (As the Picture Shown);
- Compatible with all handheld CB radios with a BNC or UHF connector, improve quality and range to CB radio reception. Compatible with Handheld CB Radios: Uniden PRO401HH PRO501HH PC88LTX, Cobra HH50WXST H38WXST HHRT50, Midland 75-785 75-822 7W44, Maxon HCB-10C.
- This soft whip antenna can be removed and installed directly on the CB radio for use. The antenna design is soft, flexible and durable. It can also be used on a magnetic base. Both usages are very convenient.
- Max Input Power: 30W; Frequency: 27MHz; Antenna&Cable Connector Type: BNC Male Connector; Height: 9.9 inch / 25cm;
- Feature: with Magnetic Base; Cable Type: RG58/U Coaxial Cable; Cable Length: 3m / 10 feet; Cable Connector Type: BNC Male Connector; Accessories: UHF PL-259 Male to BNC Female Connector;
- Package Includes: 1 x Antenna, 1 x Magnetic Base, 1 x Connector
The article ends here, detailing the best cb antenna for car. However, the best option for each person will vary depending on their individual needs and preferences. But here, the products we have listed above, have great features and are highly rated by customers. So, I hope that it may have helped you finalize your decision to choose the best one for you.
Last update on 2022-08-10 / Affiliate links / Images from Amazon Product Advertising API