With the help of this article, you will be able to have a broader understanding of best exhaust repair putty, as I will be discussing the features, pros, and cons in detail. Other than that, make sure to read until the end.
If you don’t have the time or the energy to look for the exhaust repair putty that best suited for you, no worries; I have you covered. I have put together here a list of the best exhaust repair putty currently available.
Top 10 Best Exhaust Repair Putty
Reviews on 10 Top Rated Exhaust Repair Putty
If you are looking for the Best Exhaust Repair Putty, then any of these 10 would be a great choice for you.
Walker Exhaust 35958 Muffler/Exhaust Putty
- Effective for sealing exhaust joints subject to elevated temperatures
- Ideal for "out-of-round" muffler and pipe connections
- Cures in minutes
- New Walker accessories help to ensure effective exhaust repairs
- Walker supplies all of the accessories you need to do the complete exhaust job
Hylomar F/EXPU0HY/250G Exhaust Repair Putty 250 g
- Hylomar exhaust repair putty - 250g
- Water-based heat curing repair putty designed for use in the repair of small cracks and holes in exhaust systems
- Will resist the conditions typically found in vehicle exhaust system
- The asbestos-free formulation is designed to withstand temperatures of up to 1000°C
J-B Weld 8297 HighHeat 500 Degree Epoxy Putty Stick - 2 oz. , Grey
- J-B WELD HIGHHEAT: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild materials that will be exposed to high temperatures in automotive and industrial maintenance applications. J-B Weld HighHeat is designed for DIY repairs on exhaust manifolds, tail pipes, mufflers, engine blocks, duct work and other various high temperature projects.
- CURE AND SET TIME: After kneading the two part formula together by hand, HighHeat takes 1 hour to set and cures in 8 hours. J-B Weld HighHeat set and cure color is machine grey.
- PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat has lap shear strength of 800 PSI at room temperature and 600 PSI at 400oF (204oC) or more. HighHeat is able to withstand continuous heat up to 450oF (232oC) and intermittent heat of 500oF (260oC). HighHeat is 3x stronger at higher temperatures than conventional epoxy puttys and can be tapped and drilled.
- MAJOR USES: Exhaust Manifolds, Tail Pipes, Mufflers, Engine Blocks, Duct Work, Machinery and other high temperature equipment.
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
- 3 times stronger at high temperatures
- Withstands continuous heat up to 450 degrees Fahrenheit, and intermittent heat up to 500 degrees Fahrenheit
J-B Weld 37901 ExtremeHeat High Temperature Resistant Metallic Paste - 3 oz
- Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains No Solvents Or Volatile Organic Compounds (Vocs).
- The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It Creates A Permanent Bond Stronger Than Steel.
- Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam Connections Or Holes.
- Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes, Gas And Commercial Furnaces And Water Heaters.
J-B Weld MufflerSeal Muffler Cement Plastic Tube 12 oz., Model Number: 37912
- J-B Weld Muffler Seal: MufflerSeal is an iron reinforced paste designed to seal mufflers, pipe joints and exhaust systems. MufflerSeal can resists up to 700 F.
- Cure Process: MufflerSeal can cure in two ways: By allowing the product to fully harden after it has been applied which can take up to 24 hours (time may vary based on cold or humid work environments) or MufflerSeal can be cured through heat application. You will be able to tell when the product is cured once it is hard.
- Projects: Mufflers, Pipe Joints and Exhaust Systems.
- Package Weight: 12.5 ounces
J-B Weld ExhaustWeld 2" x 72" Repair Wrap, White
- J-B Weld Exhaustweld: A High Strength Fiberglass Wrap, Impregnated With A Specially Formulated Resin For High Temperature Resistant Repairs. Exhaustweld Can Resist Up To 1100°F Once It Is Fully Cured
- Cure And Set Time: Exhaustweld Can Cure With Or Without Heat! It Will Cure Within 20 Minutes If Heat Is Applied To It With Either A Heat Gun Or By Letting The Engine Run. Without Heat, Exhaustweld Will Set In 20 Minutes And Cure In 2 Hours
- High Heat Resistance: Once Fully Cured, J-B Weld Exhaustweld Exhaust System Repair Wrap Has A Temperature Resistance Of 1100°F, Allowing It To Be Used On Every Part Of The Exhaust System
- Applications: Manifolds, Catalytic Converters, Mufflers, Tailpipes And More
Blue Magic 18003TRI ThermoSteel High-Temp Metal Repair - 3 oz.
- Product Type: Auto Accessory
- Package Quantity: 1
- Package Dimensions: 14.732 cms (L) x 8.89 cms (W) x 5.08 cms (H)
- Country Of Origin: United States
Permatex 80333 Muffler and Tailpipe Putty, 4 oz., 4 Ounce
- Permanently repairs holes and leaks in exhaust systems
- Seals out fumes at temperatures up to 2000F
- Safe for catalytic converters
- 2 pouch bonus pack
- Suggested Applications: Mufflers, tailpipes, joints and catalytic converters
Conclusion
The article ends here, detailing the best exhaust repair putty. However, the best option for each person will vary depending on their individual needs and preferences. But here, the products we have listed above, have great features and are highly rated by customers. So, I hope that it may have helped you finalize your decision to choose the best one for you.
Last update on 2023-03-30 / Affiliate links / Images from Amazon Product Advertising API
