Best Inline Fuel Pump for Fuel Injection

With the help of this article, you will be able to have a broader understanding of best inline fuel pump for fuel injection, as I will be discussing the features, pros, and cons in detail. Other than that, make sure to read until the end.

If you don’t have the time or the energy to look for the inline fuel pump for fuel injection that best suited for you, no worries; I have you covered. I have put together here a list of the best inline fuel pump for fuel injection currently available.

Top 10 Best Inline Fuel Pump for Fuel Injection

Reviews on 10 Top Rated Inline Fuel Pump for Fuel Injection

If you are looking for the Best Inline Fuel Pump for Fuel Injection, then any of these 10 would be a great choice for you.

FAST 30227-06KIT EZ Fuel Self-Tuning Throttle Body Injection Kit w/Inline Fuel Pump
  • Direct bolt-on carburetor replacement with throttle body dimensions similar to Holley And other popular carburettors, including a Holley-style throttle linkage And 4150 square flange intake bolt pattern
  • Includes injectors And fuel rails supporting up to 650 HP
  • No software necessary; intuitive self-learning system will work with only a few simple questions answered in the handheld's Setup Wizard And one throttle screw adjustment
  • Can control electric fuel pump, electric cooling fan And A/C line to raise idle RPM when A/C is turned on
  • Includes in-line fuel pump.
JDMSPEED New Universal Inline High Pressure Fuel Pump 12V Gasoline Fuel Injection Pump Replacement 0580464070 0580453911 0580463017 0580464023
  • External Fuel Pump is made of high-density brass and steel alloy, with high hardness, not easy to wear, not easy to corrode, and has a long service life
  • Package Include: 1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut
  • This is a universal fit pump and depending on your application some adapting will be required, Installation may require skill and knowledge, no instructions are included
  • Support high power application: 300-800 H,Comes with a 1-3/4'' | 45mm gauge & 1/8'' NPT gauge port, adjustable from 0 to 100 psi to maximum fuel pump capacity
  • Technical Data: Inlet - ½” (12mm) push on; Outlet – ¼” (8mm) push on; Flow rate - 135ltr/hr @ 3bar (35 gal/hr @ 45 psi); Max pressure - 8.5bar (125 psi)
  • Interchange Part Number: 0580453911, 0580463017, 0580464023, 0580463010, 0580464008, 0580464032, 0580463011, 0580464013, 0580464033, 0580463012, 0580464014, 0580464038, 0580463013, 0580464015, 0580464048, 0580463014, 0580464016, 0580464050, 0580463015, 0580464019, 0580464051, 0580463016, 0580464020, 0580464055, 0580464056, 0580464070, 0580810046
  • Universal external in line fuel pump. Does not need to be mounted inside the tank; Use this pump for turbo/non turbo gas fuel injection systems up to 250bhp
Fitech Fuel Injection Go Street EFI System Master Kit w/ Inline Fuel Pump - 31003
  • Comes with a handheld controller
  • Features a die cast construction with a beautiful finish
  • It has extreme self-learning for wide range super-fast dial in correction
  • The EZ-tach input, reads tach signal from Coil, HEI, MSD/CDI and many other brand ignitions
  • Pre-programmed with Bolt-N-Go technology for out of the box performance with no tuning required
MOSTPLUS - 0580254044 254 044 - 380LPH Inline External Fuel Pump - 10AN Inlet with Check Vavle 8AN Outlet
  • 【Interchange Part Number】- 0580254044, 044, 0 580 254 044, 50-1005 (the same standard production as the original OEM)
  • 【Design】- MOSTPLUS fuel pumps are used in high-output naturally aspirated and forced induction EFI vehicles
  • 【Package includes】- 1 x fuel pump; -6 to -8 male AN discharge fitting with check valve; 10 AN male inlet fitting; terminal nuts; boots
  • 【Quality & Features】- Maintains very high flow even at boosted fuel pressures; 340lph @ 73 PSI (30 psi boost); Installs externally or in-tank
  • 【NOTE】- Before Purchasing to Make Sure this Parts will Fits on your Vehicle and check the Fitment Details
GoodQbuy® Universal External Inline High Performance 300 LPH Inline Fuel Injection Pump is compatible with Racing Cars Replacing BOSCH 0580254044 0580 254 044
  • Universal External Inline High Performance 300 LPH Fuel Injection Pump
  • Operating Voltage: 12V, Operating Pressure: 75PSI (5.0 Bar)
  • Flow Rate: 200 LPH (53 GPH) under 75 PSI (5.0 Bar) & 12V, 300 LPH (80 GPH) under 43 PSI (3.0 bar) & 12V, 300 LPH (80 GPH) under 75 PSI (5.0Bab) & 13.5V
  • Superior turbine pump design virtually eliminates fuel pulsation,Precision, spin-balanced and polymer-encased armature reduces noise and vibration
  • Premium carbon brushes, utilizing advanced materials provides longer, reliable service life,Noise suppression coil virtually eliminates radio frequency interference
Diesel Engine Technology: Fundamentals, Service, Repair
  • Norman, Andrew (Author)
  • English (Publication Language)
  • 280 Pages - 02/15/2021 (Publication Date) - Goodheart-Willcox (Publisher)
EVIL ENERGY External Fuel Pump 300LPH High Flow 12V 145psi Universal Fit for AN10 Inlet / AN6 Outlet
  • The electric fuel pump kit comes with universal hardware to fit multiple vehicles models. Item included: 1pc 300LPH high flow external fuel pump, 1pc internal fuel filter (already fitted), 2pcs rubber connection covers, 2pcs insulated terminals, 2pcs nuts, 2pcs spring washers, 1pc flat washer, 1pc 6AN male outlet adapter, 1pc 10AN male inlet adapter and 1pc instruction.
  • Compatible Fuel: gasoline, pump gas, race gas, diesel, E85 and alcohol/ethanol. The supply voltage will affect the fuel delivery of the EVIL ENERGY external inline fuel pump. Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F
  • Easy to install. Since it does not require dropping the fuel tank, fuel pump placement and fuel line routing is critical. Recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than your fuel tank, prohibits fuel flow to the pump and forces fuel to be drawn up to it. This causes the pump to work harder run hotter and can cause air to enter the fuel line will result in damage to the fuel system.
  • The EVIL ENERGY 300LPH High Flow Fuel Pump designed to be used externally or as an in tank installation. A pre-filter rated at 100 microns MUST be used. Failure to use a suitable pre-filter will result in premature failure of the pump.
  • Notice: EVIL ENERGY fuel pump only fit 12-volt DC batteries car. This fuel pump is intended for electronic fuel injection systems only. It is not suitable for carbureted engines. Before starting the engine, ensure there are no leaks at any point in the fuel system. Before wiring the pump to the electrical system make sure the polarity is correct.
Aumtoni Inline Fuel Pump, 255LPH GSL392-400-939, High Pressure Universal External Pump, for GSL392 with 400-939 Kit And 128-3039-6AN Fittings
  • 【Part Number】GSL392-400-939, GSL392, 400-939, 255LPH, GCL611-2, GSS342, F90000267, F90000274, F90000285
  • 【Multiple Application】Fits most EFI applications including turbo and supercharged,Variety of pressures and flows available, including high pressure performance.
  • 【Technical parameter】Flow Rate: 69 GPH / 255 LPH (Free Flow), Pressure: 140 Max Pump PSI (Not System), Volts: 12v- 13.5v.
  • 【Item-included】 GSL392 External Fuel Pump, 3/8 Hose Barb Fuel Fitting, Crush Washers, Electrical Connectors, Starlock Washers, Nuts, Mounting Clamps, Mounting Cushion.
  • 【Service】Lifetime warranty. If aumtoni inline fuel pump has any issue, support return and refund.
LS1 EFI Fuel Pump And Regulator/Filter Kit
  • Budget friendly inline external fuel pump for LS swap kit
  • Features a high quality 255 lph MSD fuel pump capable of 43 gph @ 40 psi or 39 gph at 80 psi
  • All in one filter/regulator is fixed at 58 psi
  • Return port fixed on filter/regulator offering a shorter return line to the fuel tank
  • Includes adapters to AN6 for filter/regulator and hose nipples for 3/8" inlet and 5/16" outlet on fuel pump
Inline Fuel Pump 255LPH HIGH PRESSURE (Universal External Pump) Replaces GSL392-400-939
  • 【High Qulity】All metal shell including inlet and outlet. Variety of pressures and flows available, including high pressure performance.
  • 【Technical Data】Pressure: 255 (LPH) Liters Per Hour; AMP: 20; 10mm x 1mm threaded inlet and outlet accept a variety of fittings. OE-proven second generation.Include two standard universal fittings which can connect to any 5/16 inch hose.
  • 【Upgrade pump 】255LPH High Pressure Inline Fuel Pump are extremely popular upgrades to vehicles with engine and performance modifications, supporting up to 650 horse power.
  • 【Application】This GSL392 fuel pump is used in vehicles for racing or performance purposes where higher pressure fuel is necessary. Turbocharged, Supercharged.
  • 【Warranty】This fuel pump comes with 30 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited replacement promise. If you don't like it, just return it and get a full refund. If it doesn’t work well and just contact us, we’ll offer you a replacement directly. Our aim is to make you satisfy the parts and the service we provide for you.

Conclusion

The article ends here, detailing the best inline fuel pump for fuel injection. However, the best option for each person will vary depending on their individual needs and preferences. But here, the products we have listed above, have great features and are highly rated by customers. So, I hope that it may have helped you finalize your decision to choose the best one for you.

Last update on 2022-07-06 / Affiliate links / Images from Amazon Product Advertising API

asn

Leave a Comment