Best Motorcycle Cup Holder

With the help of this article, you will be able to have a broader understanding of best motorcycle cup holder, as I will be discussing the features, pros, and cons in detail. Other than that, make sure to read until the end.

If you don’t have the time or the energy to look for the motorcycle cup holder that best suited for you, no worries; I have you covered. I have put together here a list of the best motorcycle cup holder currently available.

Top 10 Best Motorcycle Cup Holder

Reviews on 10 Top Rated Motorcycle Cup Holder

If you are looking for the Best Motorcycle Cup Holder, then any of these 10 would be a great choice for you.

Chrome Motorcycle Handlebar Mount, Cup Drink Water Bottle Holder for Handlebar, Armrest, Roll Bar (Silver)
  • HIGH-QUALITY MATERIALS: The cup holder is made of mirror-surfaced chrome-plated aluminum alloy, and the handle is made of high-strength steel. The surface is smooth, easy to clean, corrosion-resistant and durable.
  • MULTIFUNCTIONAL CUP HOLDER: There are two detachable foam insulation layers inside the cup holder. The insulation layer not only helps keep your drinks hot or cold, but also fixes small cups so that they will not shake or even roll over when driving on bumpy roads. There is a drain hole at the bottom of the cup holder. When your cold drink precipitate water or overflows, you can drain the water in time to keep the inside of the cup holder clean and dry.
  • WHERE CAN IT BE INSTALLED: Suitable for Harley, ATV, UTV, motorcycle, bike. Fits 7/8" to 1 1/4" handlebars(7/8" =22mm; 1" = 25mm; 1 1/4" =32mm).
  • WHAT YOU WILL GET: cup holder x 1, silicone protective ring x 1, spacer x 4, Screwdriver x 1, If you have any questions, just feel free to contact us for help.
kemimoto Motorcycle Cup Holder, Oxford Fabric Motorcycle Drink Holder with 0.6"-1.5" Alligator Clamp, Universal Water Bottle Holder for Motorcycle, ATV/UTV, Scooter, Boat, Kayak, Bike, Walker
  • 【Upgraded Alligator Clamp】Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90°adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles.
  • 【Easy to Install on 0.6"-1.5" Pole】The alligator clamp of this kayak cup holder fits 0.6"-1.5" diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design.
  • 【24oz Max Load Capacity】The maximum cup capacity can reach 24oz, please note that the bottom diameter of the scooter cup holder is 3.94 in. With a drain at the bottom of cup holder to keep the water out.
  • 【With Tightening Drawstring】The adjustable top drawstring is reinforced and tight. You can cinch down on the top to hold the drink firm if the going gets bumpy keeping it from flopping around along your ride.
  • 【Durable Fabric with 2 Separated Mesh Pockets】Be Made of 600D oxford fabric instead of other stainless steel or plastic holder, durable and washable. Don’t worry about rusty and broken after 2-3 months. 2 Mesh pockets to easily hold your little things.
LEXIN LX-C3 Motorcycle Cup Holder, Drink Holder for Harley Davidson/ATV/Bike, Harley Cup Holder Fits Handlebar 7/8'' to 1 1/4'', with 360°Swivel Ball-Mount
  • "Gear" Design Basket: To hold your drink and bottles sturdily and securely, LX-C3 cup holder for motorcycle features “rubber gear”, that can prevent it from spilling or falling during riding.
  • Great Handlebar Compatibility: Fits handlebars from 7/8” to 1 ¼” in diameter with different spacers included. This cup holder for harley davidson is especially suitable for most Harley Davidson motorcycles, ATV/UTV, Scotter, Can-Am, Yacht, Bicycle, Bike, Boat, Canoes, Wheelchair, Kayaks, Camper, etc.
  • Large Capacity: This harley davidson cup holder improved rubber gear basket accepts different sizes of cups, cans, or bottles up to 32oz and 3.15'' maximum diameter.
  • Flexible and Easy Installation: With Selectable Positioning Using 360 Degree Swivel Ball Design, you can adjust the LX-C3 atv cup holder for motorcycle in any direction to meet your need.
  • Well-made Material: High-quality chrome metal instead of plastic, the clamp of this harley drink holder is more durable for use. The Neoprene material makes this basket easy to dry and keep.
Kemimoto Motorcycle ATV Cup Holder, Upgraded Motorcycle Drink Holder Handlebar, Water Bottle Holder Mount with 0.6”-1.56” Metal Clamp for Scooter Bike Boat Stroller Wheelchair Golf Push Cart Tractor
  • 【28oz Max Load Capacity】kemimoto cup holder provides a higher load-bearing capacity. After testing, the maximum load-bearing capacity of kemimoto cup holder can reach 28oz. Don't worry about breaking or falling if your bottle weighs below 28oz. kemimoto bottle holder could accommodate 12oz-28oz water cups.
  • 【Larger&Adjustable Holder Size 3.5In】The maximum adapted diameter of the motorcycle cup holder is 3.5 inches. The capacity of the motorcycle drink holder can be manually adjusted at the bottom. Flexible arms allow for different size cups (ordinary water cups/bottles/cans, travel mugs, beverages). And it is also bluetooth-compatible.
  • 【Strong Metal Clamp&Crocodile Bite Design】Compared with other cup holders, the kemimoto ATV drink holder is made of durable and sturdy metal material; the crocodile bite design of kemimoto cup holder can obtain a stronger grip, not easy to slip or vibrate. Meanwhile, 2 pieces of anti-skip pad gaskets will be provided to fit handlebars better.
  • 【Wide Compatibility 0.6”-1.56”】The mount range of kemimoto bike cup holder is 0.6 in-1.75 in. Suitable for different handlebars and different occasions, the kemimoto water cup holder can fit most ATVs, motorcycles, bicycles, quads, boats, strollers, walkers, wheelchairs, scooters, and golf carts, compatible with Polaris Sportsman Scrambler Rancher, and so on four wheeler. This is also a portable speaker mount with wide compatibility and application.
  • 【Anti-Break&Tough Material】Compared with the old style, the upgraded 4 wheeler cup holder is made of tougher, crack-proof, thicker PP material, not easy to crack. This holder grips hard enough not to bounce up and down and slide around or fall off while going over rough terrain.
Motorcycle Cup Holder, Chrome Handlebar Mount Cup Drink Water Bottle Holder for Motorcycle, Bike
  • [High quality materials] Glossy silver and matte black are available. The silver adjustable and stable cup holder is made of mirror chrome-plated aluminum alloy with metal handles and accessories. The surface is smooth, corrosion resistant, strong and durable.
  • [Compatibility] The height of the cup is 3.82 inch, the Inner diameter of the cup is 2.83-3.54 inch, and the inner diameter of the handlebar fitting is 1.26 inch, universal cup holder fits to all bikes with 7/8‘’ to 1 1/4‘’ handle bars. Our motorcycle drink holders are are highly compatible, suitable for all kinds of motorcycles(Including Harley Davidson) bicycles, scooters, etc.. It can hold many size containers such as water cups, beverages, coffee, etc.
  • [Practical cup holder] The cup holder comes with a removable black foam insulation layer inside. Not only does it help hold and protect your cup or drink from bumps and shakes, but it also limits heat transfer to keep your drink hot or cold. There is a drainage hole at the bottom of the cup holder. It can also act as a container for some of your sundries, such as gloves, small power banks, etc.
  • [Easy to install] You can fix it anywhere you need it, easy to install and use, convenient installation, easily detachable from chrome-plate bracket. After being fixed, it is hard to fall off. You will get: cup holder x1, black foam insulation pad x1, handle spacer x1, small wrench x1, some screws.
  • [No worries after sale] If you have any questions, please feel free to contact us for help. Our mission is to provide the highest quality products at the most affordable prices.
Motorcycle ATV Bike Cup Holder Water Bottle Cages Handlebar Water Bottle Holder with 0.8” -1.2” Metal Clamp for Scooter Bike Boat Stroller Wheelchair Golf Cart ATV Motorcycle
  • 【Break Resistant & Tough Material】 Made of thick CNC aluminum and POM, strong, durable, crack resistant.
  • 【Large Capacity Holder】 The maximum adapted diameter of the holder is 3 inches, adjustable tightness by screw.
  • 【Two Mounting Directions】 Horizontal installation and Vertical installation, Easy to mount on motorcycle mounts.️
  • 【Mount Diameter 0.6” -1.1”】 The cup holder with aluminum clamp, the mount ranger is 0.6 inches-1.1 inches, be installed horizontally or vertically, to accommodate cups, cans and bottles.
  • 【Widely Used】 It is suitable for different handlebars and occasions, motorcycle, ATV/UTV, scooters, Can-Am, , bicycle, bike, golf carts, boat, scotter, yacht, canoe, kayak, 4 wheeler, camper, wheelchair, strollers, walkers, etc.
XGZ Motorcycle Cup Holder, Secure Retention Bottle Holder Fix On Handlebar,Motorcycle Water Cup Holder,Lightweight Bicycle Bottle Holder Black
  • 【Sturdy Bottle Holder】☆☆ The Handlebar Cup Holder surrounds the bottle and can be firmly fixed so that you don't have to worry about it falling out during riding.
  • 【Easy Installation】☆☆ Suitable for Hon-da Gold Wing GL1800 2018-up and motorcycle models with handlebar mount or mirror mount. Installing a Handlebar Cup Holder is very easy. It fits models with suitable handlebar spare place, please make sure these parts fit your motorcycle before ordering.
  • 【Durable and Lightweight】☆☆ Made from quality rubber and aluminum, the Handlebar Motorcycle Cup Holder is strong and light, not easy to deform, and corrosion-resistant. It is very easy to wipe and clean.
  • 【Wide Application】☆☆ The Motorcycle Water Cup Holder is a perfect gift for cyclists, keeping them stay hydrated on both road and trail rides, suitable for most sizes of cycling water bottles.
  • 【Easy Access】☆☆ The Motorcycle Drink Holder makes it easy to access your bottles on even the most compact road and motorbike. You can stay well hydrated while riding and enjoy an enjoyable ride.
Diamond Plate Stainless Steel Motorcycle Cup Holder - Motorbike, Bicycle, ATV, Scooter Handlebar Mounted Cup Holder - Adjustable Clamp, 360-Degree Rotation, Foam Insert - Riding Accessories
  • Stay Hydrated On The Road - Easily grab your beverage while you are out cruising the open road. Our motorcycle drink holder securely attaches to handlebars and is able to fit standard water bottles.
  • A Snug, Secure Fit - Worried about your refreshment slipping out or falling off this motorcycle beverage holder? It's fitted with a foam insert that holds your drink securely in place while you ride.
  • Built For Year-Round Use - You can count on this motorbike, or ATV cup holder to last years. It is made of premium stainless steel which withstands the formation of rust, stains, or corrosion.
  • Universal Compatibility - Not sure if the cup holder for motorcycle will fit on your ride? It features an adjustable clamp and is designed to fit 1-1.25-inch motorcycle, bike, or scooter handlebars.
  • Complete Accessories - Easily install our cup holders for motorcycle using the motorcycle drink holder clamp. The set also comes with a hex key wrench and an extra screw for effortless installation.
WOWTK Chrome Handlebar Cup Holder, 1''Universal Drink Holder with Basket for Harley Davidson Sportster Softail Dyna Touring Street Glide Road King Road Glide Electra Glide Vulcan Yamaha Suzuki Honda
  • 1 inch Motorcycle Cup Holder Universal fits for Harley Davidson Sportster Softail Dyna Touring Street Glide Road King Road Glide Electra Glide Vulcan Yamaha Suzuki Honda Kawasaki Indian with 1 inch diameter handlebar
  • Don't cut your ride short because of a "parched passenger". This is a great solution to carry a beverage for them too. Using chrome plating that is durable and made to last, the passenger drink holder looks as good as it works.
  • Features "fingers" to firmly grasp onto various sized containers
  • In the box : 1 x Motorcycle Cup Holder ,Includes mounting hardware
  • WOWTK wants to make sure that all products meet your expectations both before and after installation. Contact our Customer Service Team who will be happy to take care of you regarding any questions you may have
Three T Handlebar Cup Holder, Drink Cup Holder For Harley-Davidson most model Chrome
  • Fitment: Motorcycle Handlebar Cup Holder, Drink Cup Holder For Harley-Davidson most model. Double checked the size of your old holder cup to comfirm it fits your bike
  • For H-D Fatboy FLSTFBS 16, FatBoy Lo FLSTFB 10-16, FLS Slim 12-16, Freewheeler FLRT 15, FXR 2 99/4 00, Low Glide Custom FXRC 85, Low Glide FXRS 84-85, Low Rider Chrome FXRC 87
  • For H-D Low Rider Convertible FXRS 90-93, Low Rider Custom FXLR 87-94, Low Rider FXRS 86-93, Low Rider Sport FXRS-SP 88-93, Road Glide FLTRXS 15-16, Road Glide Ultra FLTRU 11-13&16, Road King EFI FL 07-16, Road King Classic FL EFI 07-13; FLI 98-06, Road King Custom EFI FL 07, Road King Custom FL 04-06
  • Height: 105mm; Diameter: 85mm; Material: Aluminum / Rubber
  • Package included: 1x Drink Cup Holder w/ Universal Mount To Fit Most Clutch or Brake Perch


The article ends here, detailing the best motorcycle cup holder. However, the best option for each person will vary depending on their individual needs and preferences. But here, the products we have listed above, have great features and are highly rated by customers. So, I hope that it may have helped you finalize your decision to choose the best one for you.

Last update on 2023-03-25 / Affiliate links / Images from Amazon Product Advertising API


Leave a Comment