Best Subwoofer Car Audio

With the help of this article, you will be able to have a broader understanding of best subwoofer car audio, as I will be discussing the features, pros, and cons in detail. Other than that, make sure to read until the end.

If you don’t have the time or the energy to look for the subwoofer car audio that best suited for you, no worries; I have you covered. I have put together here a list of the best subwoofer car audio currently available.

Top 10 Best Subwoofer Car Audio

Reviews on 10 Top Rated Subwoofer Car Audio

If you are looking for the Best Subwoofer Car Audio, then any of these 10 would be a great choice for you.

MTX Audio Terminator Series TNE212D 1,200-Watt Dual 12-Inch Sub Enclosure
  • 5/8" MDF Construction
  • Frequency response: 10Hz - 150Hz. Aviation Grade Carpet
  • Embroidered Terminator Logo; Impedance: 2Ω
  • Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure
  • Houses two 12-Inch Terminator subwoofers, TNP212D2, or a vented enclosure
  • Frequency response: 10Hz - 150Hz. Ideal solutions for anyone looking to add bass to their vehicle
  • Ruggedly constructed using 5/8" MDF and aviation grade black carpet
BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space
  • Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
PRORECK PR-122M Complete 1500W Dual 12" Car Subwoofer, Includes Loaded Enclosure with Mono Block Amplifier,Wiring Installation Kit
  • Package Includes: (1) PRORECK PR-1500.1M 1500W Amplifier, (1) dual 12" Car Subwoofer, (1) Complete Amp Installation Wire Kit.
  • PRORECK PR-1500.1M Dual 12” Car Subwoofer enclosure system with matching mono block amplifier. 1500 watts peak power/ 400 watts RMS. The surface is high quality aviation grade tweed carpet and has embroidery. The angle is 15%, close to the perfect vehicle bass alignment. Frequency Response: 15Hz - 20kHz. Power Output: 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N. 4-Ohm Mono-Block Class A/B. Dynamic Power: 400 Watts @ 2 Ohms.
  • This system includes a top-level Enclosure with more powerful and rich bass. It also includes a mono block bass amplifier. This mono amplifier is built just for loud bass.It feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features. It has efficient bass response with deep and clean sound.
  • Amplifier with full range RCA output, RCA line input, high level input, bass EQ, dashboard remote, etc, meet all your needs.And amplifier contains mute circuit, bass optimization circuit, protection circuit, thermal protection, speaker short circuit protection, input overload protection and DC offset protection,make users have a better experience. Rich wire set, can meet your complete needs.
  • Wiring Kit Features:(1)High Grade Twisted Pair 100% Copper RCA Cables,(1)Blue Super Flex Power Cable,(1)Black Ground Wire,(1)Black Remote Cable and (1)Remote control,(1)Black Split Tube,(1)Speaker Wire,(1)Gold Plated ANL Heat Resistant Fuse Holder,(1)30 Amp ANL Gold Plated Fuse.Accessories: Wire ties, ring terminals, butt connectors, spades and grommet. Amplifier dimensions: 11 x 9.1 x 1.9 inches (L x W x H) Subwoofer dimensions: 28.7 x 14.2 x 15.7 inches (L x W x H)
Pioneer TS-WX1210AM 12” 1300 Max Power with Built-in Amplifier - Active Ported Pre-Loaded Enclosure Subwoofer
  • 1300 W Max Power (350 W Nominal) Pre-loaded 12" Injection Molded Polypropylene (IMPP) Composite Cone Construction Subwoofer
  • Built-in 300 W Max (150 W RMS) Class D amplifier
  • Ported enclosure design for powerful, deep and accurate bass response
  • Variable Bass Boost (0 to +12 dB, 20Hz to 130Hz)
Rockville SS8P 400w 8" Slim Under-Seat Active Powered Car/Truck Subwoofer Sub
  • Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub.
  • Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts.
  • RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°.
  • Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%. Subwoofer Level Remote Control. Fuse Rating: Single 15A.
  • Specifications: Peak Power 400 Watts. RMS Power: 100 Watts. Impedance: 4 Ohm. Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches. Frequency Response: 20Hz - 150Hz. Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V
BOSS Audio Systems BASS10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space, Remote Subwoofer Control
  • Space Saver - If you are tight on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options
  • Pulse Width Modulated - PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • Specs - Dimensions: 14” x 12.3” x 3.3”, Weight: 11.35 lbs. Phase control. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone
Kicker 10" 600 Watt 4 Ohm Vented Thin Profile Subwoofer Enclosure | 44TCWC104
  • 3/4" medium-density fiberboard construction covered with carpet
  • 4-ohm total impedance
  • power handling: 300 watts RMS
Skar Audio Single 10" Complete 1, 200 Watt Sdr Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
  • All-in-one complete SDR series loaded Subwoofer complete bass package
  • Peak Power: 1, 200 watts | RMS Power: 600 watts
  • Includes x1 Skar Audio sdr-1x10d2 single 10" Loaded 1, 200 watt vented subwoofer enclosure
  • Includes x1 Skar Audio rp-800.1D class D 800 watt mono-block amplifier
  • Includes x1 Skar Audio skar4anl-cca 4 gauge complete amplifier wiring kit
  • Included Components: X1 Skar Audio Sdr-1X10D2 10-Inch Loaded Subwoofer Enclosure;X1 Skar Audio Rp-800.1D Class D Monoblock Subwoofer Amplifier;X1 Skar Audio Skar4Anl-Cca 4 Gauge Amplifier Wiring Kit
Skar Audio Dual 12" Complete 2,400 Watt SDR Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
  • All-in-One Complete SDR Series Dual 12-inch Loaded Subwoofer Complete Bass Package
  • Peak Power: 2,400 Watts | RMS Power: 1,200 Watts
  • Includes x1 Skar Audio SDR-2X12D4 Dual 12" Loaded 2,400 Watt Vented Subwoofer Enclosure
  • Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier
  • Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
Rockville RG212CA Dual 12 inches Slim Vented Powered Car Subwoofer Enclosure 2000 Watt
  • Features of RG212CA v2: Rockville RG212CA v2 Dual 12" Slim Vented Powered Car Subwoofer Enclosure, Complete all in one system includes built in amplifier, top quality enclosure, and dual 12” subs, Vinyl finished enclosure with side vents tuned to 40Hz, Enclosure is built with ¾” MDF and is ribbed and braced, 2000 Watts Peak power output, 500 Watts RMS, 12“ Super-Slim Subwoofer, Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement, 3D Molded Acrylic Dust Cap, Expanded & Rolled Steal Basket
  • High Density Laminated Rubber Surround, High Power Strontium Magnet with Ultra Saturated High BL Motor Structure, Vented Core Magnet Motor Structure, 2” High Temperature Aluminum Voice Coil, 8 mm Washer & Yoke Plates, 13.6 mm Peak-to-Peak X-Max, 40 oz. Magnet, Slim Vented MDF Enclosure Design, Impedance: 4-ohms, Frequency response: 30Hz-500Hz, SPL @ 1w/1m: 89dB, Dimensions: 29.52" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth, Unit Weight: 40.12 Lbs
  • Amp Features: Built-in 500 Watts RMS / 2000 Watt Mono Block Amplifier, 2 Ohm stable amplifier, Class D amplifier, Extruded aluminum heatsink stays cool even at high volumes, 200mV – 5V Variable Input Level
  • 12dB Low Pass Crossover Frequency 50Hz-200Hz, Low Level RCA Inputs, Remote level attenuation: 0 to -32.2 dB, 3.7 second turn on delay, High Level Speaker Level Input with Auto Start Music Sense, RJ11 Jack for Dash Mounted Bass Remote

Conclusion

The article ends here, detailing the best subwoofer car audio. However, the best option for each person will vary depending on their individual needs and preferences. But here, the products we have listed above, have great features and are highly rated by customers. So, I hope that it may have helped you finalize your decision to choose the best one for you.

Last update on 2022-11-29 / Affiliate links / Images from Amazon Product Advertising API

asn

Leave a Comment