Best Tool for Oil Filter Removal

With the help of this article, you will be able to have a broader understanding of best tool for oil filter removal, as I will be discussing the features, pros, and cons in detail. Other than that, make sure to read until the end.

If you don’t have the time or the energy to look for the tool for oil filter removal that best suited for you, no worries; I have you covered. I have put together here a list of the best tool for oil filter removal currently available.

Top 10 Best Tool for Oil Filter Removal

Reviews on 10 Top Rated Tool for Oil Filter Removal

If you are looking for the Best Tool for Oil Filter Removal, then any of these 10 would be a great choice for you.

Lisle 63600 Oil Filter Tool,U.S.,2-1/2 - 3-1/8
  • Fits Filters from 2 1/2" to 3 1/8".
  • This extra large range enables the 63600 wrench to fit most all import car filters plus the common 3" domestic car filters.
  • Steel jaws grip filter without slipping. Works in tight spots from the front of the filter using 3/8" drive.
  • This is to be used for removing the filter, not installing.
WORKPRO 12" Adjustable Oil Filter Pliers, Oil Filter Wrench Adjustable Oil Filter Removal Tool, Ideal For Engine Filters, Conduit, & Fittings, W114083A
  • Tips: Bent Angle Design For Easier Use; Little Oil For Rust Protection
  • High Carbon Steel For Strength And Reliability; Permalock Fastener Eliminates Nut And Bolt Failure
  • Fits Filters From 2-3/8 To 4-1/2 Inches (60 To 102 Millimeters) In Diameter
  • Soft, Nonslip Red Grips Offer Extra Reach And Leverage In Tight Places
Heavy Duty Oil Filter Wrench for Toyota,Lexus,RAV4,Camry,Tundra,Highlander,Sienna and More-Cup Style Oil Filter Cap Removal Socket Tool for 2.5-5.7L Engine with 64mm Cartridge Style Oil Filter Housing
  • DURABLE - Ibetter 64mm 14 flute cup style oil filter wrench is made of 6065 aluminum alloy, which will provide great power to rotate the extremely tight oil filter cap and doesn’t damage the plastic cap. It is more durable than IB1225.
  • EXCELLENT FINISH - Our oil filter wrenches are not only built tough, but the surface is treated with a high quality black anodized finish to prevent corrosion. The 6065 aluminum alloy with excellent finish will makes the wrench last forever.
  • REFERENCE APPLICABLE MODELS - The oil filter cap removal tool fits most of auto models such as Toyota, Lexus , RAV4, Camry, Tundra, Highlander, Sienna and More vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system. This wrench does not work on vehicles with traditional canister filters that you unscrew and throw away and does not fit the 1.8L engine oil filter cap.
  • WARRANTY - Ibetter is a brand that specializes in auto parts for many years, so, our company is very confident in our products.Just buy with our 1 year warranty service. Just believe that any problem can be resolved by contacting seller service or amazon customer service (Please fist choose seller service).
  • DRIVE - 3/8 inch square wrench.
Universal Oil Filter Wrench Adjustable 3 Jaw Oil Filter Removal Tool Range 2.4 to 4.3 inch with 1/2'' Adapter 3/8'' Square Drive Socket
  • Universal Tool - This oil filter removal tool fits oil filters ranging from 60mm to 110mm (Oil filters Range 2.4 inch to 4.3 inch). A removable 3/8-inch reducer is available for larger clearance and can be used with a 3/8-inch square drive tool.
  • 3 Jaw Design - Spurtar "claw" type oil filter wrench, ensures, with it's 3 Jaw grip, a more firm hold on the oil filter. Claws fits tighter as more torque is applied.
  • High Performance Material - 3 jaws adjustable oil filter wrench are crafted with top grade steel structure, which provides the advantage of durability and wear resistance. Finished with black-oxide coating to resist rust & corrosion.
  • Compact Design - This car filter oil change tools provides a low clearance, helping users dislodge filters even in tight spaces.
  • Bonus Gift - The oil filter wrench set includes 1/2”-3/8” drive adapter that can fit 1/2 and 3/8 inch square driver ratchet which can meet different demand.
YXGOOD Adjustable Oil Filter Wrench Remover From 2-1/2 inch to 4.5 inch Oil Filter Wrench Tool -3 Jaw
  • 【High Quality】Made of 45# carbon steel which is much stronger than normal material.The surface is crafted with chrome finished, it is totally rust and corrosion resistant and waterproof.
  • 【Universal Application】The oil filter wrench can remove the filter from 2-1/2 " to 4.5" ,fit 1/2 & 3/8 " square driver ratchet or 7/8 " wrench which can remove various models of vehicles.
  • 【3 Jaw Design】The tool is specially designed with 3 jaws. It will gives much more catching strength to the filters,with less slip and without hassle, helping users remove filters quickly.
  • 【Easy to use 】Compact structure and fits in tight spaces.It is adjustable simply adjust it on the filter by turning it then with a ratchet loose it up.
  • 【Function】This Oil Filter Wrench is used to remove the oil filter from cars and trucks.The filters are very tough, you need a oil filter to make your work easy.
Motivx Tools Oil Filter Wrench for Toyota Camry, Tundra, Tacoma, 4Runner, RAV4 and More - 64mm 14 Flute Precision CNC Machined Aluminum Oil Filter Removal Tool
  • COMPATIBLE WITH ALL TOYOTA CARTRIDGE STYLE OIL FILTERS - The Motivx Tools 64.3mm 14 flute oil filter wrench is compatible with all Toyota and Lexus cartridge style oil filter caps from 1.8L - 5.7L engines. This includes popular models like Camry, Tundra, Tacoma, 4Runner, RAV4, Corolla, Highlander, Prius and more that use a cartridge style filter where you remove a plastic cap to expose the paper filter element inside.
  • WILL NOT BREAK TABS ON FILTER - This patent pending second generation filter removal tool features a “notch-less” design which securely grips the fluted plastic portion of the oil filter cap without engaging the tabs like older wrench designs. This prevents the tabs from cracking or breaking off which can lead to serious oil leaks.
  • FITS A WIDE RANGE OF FILTERS - Outdated filter wrenches have limited fitment and only work with filters for either 1.8L or 2.5-5.7L engines. The Motivx Tools MX2320-US wrench works with all Toyota cartridge style filters and is compatible with Toyota spin-on style oil filters 90915-YZZF1, 90915-YZZN1, 90915-10009, and 90118-WBA40. Also works with select 14 flute spin-on filters from Honda, Bosch, Mobil 1, Purolator and Hiflofiltero.
  • MADE IN USA - This oil filter wrench is proudly made in the USA. It is precision CNC machined from solid aluminum for a perfect fit and includes a manufacturer's lifetime warranty. The main body of the wrench is made from 6061-T6 aluminum and anodized grey while the drive hub is made from 7075-T6 aircraft aluminum for ultimate strength and anodized red for better visibility.
  • DUAL DRIVE - This wrench can be operated with a 3/8” drive ratchet or extension, or a 24mm socket.
Ibetter 86.4mm 16 Flutes Oil Filter Wrench for BMW with 86mm Cartridge Style Filter Housing Caps, Oil Filter Housing Cap Removal Tool to Change Oil, Oil Filter Socket Wrench Kit for BMW (Black)
  • FIT FOR–Fit BMW 128i,135i,228i,228iX,320i,320iX,325i,325xi,328i,328iX,328xi,330i,330xi,335i,335is,335iX,335xi,428i,428iX,435i,435iX,525i,525xi,528i,528iX,528xi,530i,530xi,535i,535iX,535xi,550i,550iX,640i,640iX,650i,650iX,740i,740Li,740LiX,750i,750iX,750LiX,760Li,ALPINAB6X,ALPINAB7,ALPINAB7L,ALPINAB7LX,ALPINAB7X,ActiveHybrid3,ActiveHybrid5,ActiveHybrid7,MCoupe,M2,M235i,M235iX,M3,M4,M5,M6,X1(notB46),X3(notN47),X4,X5(notM57,N57,N62),X6,Z4(notM54,S54).
  • PLEASE NOTE – This Ibetter oil filter removal tools with 16 flats is specifically designed and tested to fits all 2006 and newer BMW engines that have a smooth top oil filter cap. It will not fit caps with a 6 point nut on the top. Please verify the style your vehicle before ordering. For Volvo vehicles, it is better to use Ibetter 86.6mm oil filter wrench(The silver one).
  • SUPER DURABLE – Ibetter oil filter drain tool are made from high strength steel that is updated design and allows proper removal and installation of oil filter housings.
  • DRIVE - 3/8” drive.
3mirrors Oil Filter Wrench Oil Filter Removal Tool Compatible with Toyota Lexus Scion RAV4 Camry Tundra Highlander Sienna Prius 2.5 - 5.7L Engine with 64mm Cartridge Style Oil Filter System
  • Thicker than before: This Filter Wrench forged from High Quality 6061-T5 Aluminum with black paint finish to prevent corrosion. Thicker and more solid!
  • Wide Application: Perfect for 64mm Cartridge Style Oil Filter. It has a Regular 14-sided shape, the distance between opposite sides is 64mm, so it will fit 64mm traditional canister filters.
  • Please check the 2nd & 3rd picture. It will guide you correctly. lease confirm the size of the product before purchase
  • This Oil Filter Wrench Compatible with 2013-2015 TOYOTA Avalon 2.5L; 2005-2015 Avalon 3.5L; 2010-2015 Camry 2.5L; 2007-2015 Camry 3.5L; 2010-2015 4-Runner 4.0L; 2010-2014 FJ Cruiser 4.0L; 2009-2015 Highlander 2.7L; 2008-2015 Highlander 3.5L; 2008-2015 Land Cruiser 5.7L; 2009-2015 RAV4 2.5L; 2006-2012 RAV4 3.5L; 2010-2012 Sequoia 4.6L; 2008-2015 Sequoia 5.7L; 2011-2013 Sienna 2.7L; 2007-2015 Sienna 3.5L; 2010-2015 Tundra 4.6L; 2007-2015 Tundra 5.7L; 2009-2015 Venza 2.7L; 2009-2015 Venza 3.5L;
  • The Oil Filter Cap Compatible with 2013-2015 TOYOTA ES300h 2.5L; 2007-2015 ES350 3.5L; 2007-2015 GS350 3.5L; 2007-2015 GS450h 3.5L; 2008-2011 GS460 4.6L; 2010-2015 GX460 4.6L; 2006-2015 IS250 2.5L;2006-2015 IS350 3.5L; 2007-2015 LS460 4.6L; 2008-2015 LS600H 5.0L; 2008-2015 LX570 5.7L; 2007-2015 RX350 3.5L; 2010-2015 RX450h 3.5L; 2011-2015) tc 2.5L; 100% tested before shipping, high quality assurance, you can buy with confidence.
Oil Filter Wrench Cap Removal Tool Fits 64mm Cartridge Housing for Camry Rav4 HighLander Sienna Tundra with 2.5L-5.7L Engine
  • Application: The oil filter wrench can be used to remove the oil filter caps on vehicles with 2.5L to 5.7L engines. It only works with Cartridge style oil filter system, not including traditional canister filter .Please double confirm your vehicle’s oil filter type and engine type before your purchase.
  • High Quality: Apeixoto oil filter wrench is made of 6061 T5 aluminum. This type of aluminum has a much better strength than the normal cheap cast aluminum. With high temperature forging, the oil filter wrench becomes sturdy and unbroken so that they are qualified to remove the oil filter cap. As you may know, the oil filter caps are usually well tightened and hard to removed, This aluminum wrench can do it well.
  • Design: The diameter of the oil filter wrench is 64mm. With the 4 slots on the bottle edge, it will match the oil filter cap well so that the caps can be removed easily. On top of the wrench,you can apply a 27mm socket and 3/8 inch drive ratchet. If the caps are extremely tightened, we suggest you use 27mm socket or 3/8 inch drive ratchet to make work easy.
  • Finish: The surface of oil filter wrench is coated with back powder, which gives the wrench a much more shinny surface. It will also prevent the wrench from corrosion and rust.
  • Warranty: 30 days free return and 365 days free replacement warranty. If you need any assists or meet any troubles during your usage, email us freely and our custom service will get back to you in 24 hours. If you don’t like the part, just get your refund or new replacement. All we want to do is to make you satisfy with Apeixoto oil filter wrench.
Universal Oil Filter Wrench Set for 60mm-80mm, Adjustable Oil Filter Removal Tool Cap 1/2" with 2 Durable Non Slip Serrated Jaws Special Design
  • 【SPECIFICATION】 Small/Medium Size Oil Filter Wrench; Oil filter wrench tool features a 60mm to 80mm or 80mm to 105mm range, you can choose as you needed. Please verify the suitable size for your oil filter!
  • 【ADJUSTABLE SIZE】 Adjustable oil filter wrench could be adjusted from 60mm to 80mm, fit for 1/2 connector 12.5*12.5mm. Oil filter removal tool expedites the oil changing process, making oil changing faster and more routine. Just like the video on how to use SMOTIVEPRO products
  • 【TIGHT GRIP】 2 serrated jaws ensures an oil filter socket with a firm hold on the filter, cooperating with Two Way Auto-Adjustable, helping users remove filters quickly, with less slip and without hassle. Claws fit tighter as more torque is applied.
  • 【COMPACT DESIGN】 This oil filter remover provides a low clearance, helping users dislodge filters even in tight spaces.
  • 【QUALITY MATERIALS】 2 jaws are crafted with top-grade steel and satin chrome finished, and after the process of heat treatment giving the owner confidence this tool is built to last.


The article ends here, detailing the best tool for oil filter removal. However, the best option for each person will vary depending on their individual needs and preferences. But here, the products we have listed above, have great features and are highly rated by customers. So, I hope that it may have helped you finalize your decision to choose the best one for you.

Last update on 2022-07-01 / Affiliate links / Images from Amazon Product Advertising API


Leave a Comment